Brand: SP Premier®
Category: Ground screw drivers
The mobile manual electric device for screwing screw piles consists of:
For convenient use, sturdy metal handles are attached to the sides and top of the device. The SP Premier electric ground screw driver is used for screwing piles with a diameter of 42-76 mm and a length of 1-2 m in hard-to-reach places.
At the initial stage of work, the places where the piles will be screwed are calculated and marked with the help of geodetic instruments. It takes 2-3 people to operate the device and install the pile.
Before screwing the pile, a long telescopic lever is connected to the device to keep the structure from scrolling. Next, the pile is connected to the electric drive adapter with two fixing screws, the device is switched on and the pile is screwed into the ground, keeping track of its vertical position all the time.
A building level must be used to determine the levelness of the pile and to correct it during screwing.
Electric ground screw driver SP Premier can be effectively used in the following areas:

The hand-held ground screw driver is widely used in construction and has several advantages over large special pile driving equipment.
Piles can be screwed where:
Installation is carried out without disturbing the landscape design structure of the site, unlike tractors or other special equipment, which heavily compacts the soil and destroys the surface of the lawn when driving.
| Protection Type
|
Double insulation, Class II
|
| Frequency
|
50–60 Hz
|
| Rated voltage
|
AC 220 V
|
| Maximum input power
|
1800 W
|
| Maximum torque
|
2500 Nm
|
| Torque range
|
500–2500 Nm
|
| Rotation speed
|
8 rpm
|
| For ground screw with a diameter of
|
42 mm, 60 mm, 76 mm
|
| Maximum ground screw length
|
1200–2000 mm
|
| Size of the drive square
|
25 × 25 mm
|
| Weight of the electric drive
|
9,2 kg
|
| Additional features
|
Reverse
|
Phone: +38 050 431-70-60
Viber: +38 050 431-70-60
WhatsApp: +38 050 431-70-60
Telegram: +38 050 431-70-60
Email: info@sppremier.com