Ground screw pile SPGS F 42x3x1000(350)

Application: foundations for gazebos, terraces, light sheds, fences and barriers.

Pile diameter: 42 mm
Pile wall thickness: 3 mm
Pile length: 1000 mm
Length of the helix winding: 350 mm

The average bearing capacity of piles SPGS F 42x3x1000(350) for soils, kgf

	Pressing, t	Pulling out, t
Sandy loam/loam/sand	0,620	0,440

Usage

Installation of pile foundations for:

pergolas, gazebos, terraces,
lightweight canopies,
stretch marks for awnings,
grounding,
fences, barriers, gates.

Piles can be used on land plots with any type of soil:

loam,
water-saturated clay,
sandy loam,
dusty and fine sand,
areas with too high a groundwater table.

Piles are not recommended in such cases:

rocky soils,
soils with inclusion of construction debris.

How to calculate the required pile length

It is recommended to calculate the required pile length L (mm) as follows.

L1 = A+L2+H, where:

A — is the depth of soil freezing in winter.

L2 — is the length of the helical winding.

H — required height of the pile flange above the ground level

Pile designation

SPGS F DxTxL1(L2), where:

D — pile diameter, mm

T — pile wall thickness, mm

L1 — pile length, mm

L2 — length of the helix winding

How to install screw piles

Methods of pile installation:

Manually.
With small mechanization - a ground screw driver.
Special vehicles with a unit for installation of ground screw piles.

Piles are installed by screwing them into the ground. To screw the pile manually, after marking, it is recommended to make a vertical guide hole in the soil with any available tool (crowbar, pipe).

The diameter of the hole should not exceed the diameter of the pile to be screwed. The depth of the hole is as deep as the soil allows.

The piles are installed using a pile adapter and pipes as levers. The pile adapter is attached to the pile flange to attach the lever pipes to the pile to create torque.

It is not allowed to drive screw piles.

Advantages of a foundation made of ground screw piles

Fast installation

The process of screwing in screw piles takes much less time compared to concrete foundation methods. This can significantly reduce construction time.

Cost-effectiveness

The use of screw piles can significantly save on foundation construction, as it does not require significant excavation work and the use of large amounts of concrete.

All-season use

Unlike classic concrete foundations, screw piles can be installed at any time of the year, regardless of weather conditions. Even in the cold.

High bearing capacity

Screw piles are able to withstand heavy loads due to their design and close contact with the ground.

Flexibility in use

They can be used for various types of buildings — from small structures to large commercial buildings.

Durability

The ground screw piles are made of hot-dip galvanized steel St3, which ensures their durability for many years.

Suitable for use in difficult soils and waterways

Screw piles are ideal for construction on loose, sandy, clayey, marshy soils, areas with difficult terrain, and on the banks of water bodies.

Environmentally friendly

Does not contaminate the surrounding area with concrete residues, crushed stone, sand and cement; preserves green spaces — plants and bushes on the site. Minimal impact on the environment as it does not disturb the soil ecosystem.

Ready for loading

After installation, the screw piles are ready for further construction work without the need to wait, as in the case of concrete foundations.