Optima SP Premier. A set of hardware with a 5, 6, or 7 m console
SP Premier Optima (SP-5, SP-6, SP-7) — set of hardware for sliding console gates
Brand: SP Premier®
Category: Hardware kits for SP Premier sliding cantilever gates
Designed
The SP Premier Optima set is designed for residential or entry-level industrial gates.
- Gate weight: up to 400 kg;
- Filling — ultra-light, light and medium weight:
- mesh,
- polycarbonate,
- metal sheet,
- aluminium or vinyl siding,
- metal panel;
- Gate height: 1.9–2.5 m (depending on the filling).
- up to 1.8–1.9 m — with medium weight of the filling and maximum width of the gate opening,
- up to 2.5 m — with light filling and minimum gate opening.
Width of the opening
SP Premier Optima SP-5
- up to 3,4 m,
- or up to 6,8 m (two gate leaves facing each other),
SP Premier Optima SP-6
- up to 4,0 m,
- or up to 8,0 m (two gate leaves facing each other),
SP Premier Optima SP-7
- up to 4,7 m,
- or up to 7,4 m (two gate leaves facing each other),
What is included in the SP Premier Optima set
- Guide track, length 6 m, profile dimensions 60×70×3.0 mm, hot-rolled pickled metal, steel grade S235JR.
- Carriages for 8 rollers, reinforced bearing of the 201 series of closed type, one-piece carriage plate 10 mm thick.
- Guide roller without bearing, roller material - polyamide, steel body.
- Adjustable guiding plate with 2 rollers, double-layer rollers (inner cage frost-resistant polyamide, outer shell elastic plastic resistant to UV radiation, bracket - 4 mm).
- Top end stop (Top catcher), 4 mm steel, rounded corners, wide shelves.
- Bottom end stop ( Bottom catcher), 4 mm steel, rounded corners, wide shelves.
- Guide end cap for the guide track, fast changing.
Advantages
-
The gates lasts a long time
Reasons for the longer service life of SP Premier Optima gates:
- Precise guide track geometry,
- Optimal compatibility of all elements in the set.
-
Quiet movement of the gate
Reasons for the quiet operation of gates with SP Premier Optima:
- Contact of carriage bearings with the guide track in precisely calculated locations,
- Precise geometry of the guide track.
-
Wind torsion resistance
The gate does not «twist» in the wind thanks to the full counterweight and optional r ollers guide plate. The gate is caught in the end stops (catchers) under almost any conditions.
SP Optima is available in extended versions such as SP Standart, SP Standart Trend and SP Standart Pro.
Additional advantages
- Load resistance is provided by hot-rolled pickled and passivated structural steel grade S235JR.
- Corrosion resistance (No significant corrosion of the internal cavity of the guide tracks for more than five years of intensive use), simplified storage and accelerated preparation for painting - due to the fact that the steel is passivated.
- State certificate of conformity UA0.YT.081308-21.
- Powerful carriages with 10 mm thick solid plates.
- Safety is ensured by the top and bottom end stops (catchers) with wide shelves made of 4 mm thick steel with rounded corners.
- The durability of the hardware is also achieved thanks to the UV radiation resistant and low temperature resistant double-layer support rollers that do not damage the gate coating.
- The internal cavity of the guide track is protected from dirt or snow by the front swivel roller with an assembled cap and the rear metal guide end cap.
- The reliability and durability of one of the key connections are ensured by the 20 mm thick carriage pin with 8 mm thick eyelets.
- The branded markings on the kits, consoles and carriages protect against counterfeiting.
Information to order
- 00000000065 SP-5 Optima 5 m.
- 00000000117 SP-6 Optima 6 m.
- 00000001664 SP-7 Optima 7 m.
Additional options for the Optima set
- Toothed rail for installing automation.
- Set of SP Premier adjustment plates for cantilever carriage.
- Optional SP Premier r ollers guide plate.
- Front metal roller on 201 series bearing complete with plug with rubber bumpers.
Download the passport for a set of hardware for sliding gates Optima
